|
|
  
Scaffolding Prop
|
|  Props provide the ideal and the most economic method of support for all kinds of formwork, slabs, beams, wall & columns. They are also invaluable for a wide variety of applications in general building construction and repair work. Props eliminate the costly labour and time consumer in cutting timber to length, wedging and nailing when used in the vertical as a prop.
Unique Features :
The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment.
The cast collar located below the pin gives fine adjustment for lending and striking.
A self-cleaning device on the collar nut, which automatically clears the thread of concrete, and dirt where the nut is rotated thus assuring quick and easy adjustment.
A hole boss on the collar nut which makes it easy to turn in confined spaces. By inserting a bar in the hole.
Base plates and head plates are holed for use with slab from work.
TPI ACME square thread ensure load bearing strength at this critical point
Standard special shores pins are also available on request.
Beam type or U-head Props are also available according to customer's requirement.
|
Minimum Characteristic strength
| Size | Closed Height | Extended Height | Loaded at closed | Load at extended | Appx. wt. | | 0 M | 1.00 | 1.75 | 3500 KG | 3000 KG | 11.1 KG | | 1 M | 1.50 | 2.75 | 3200 KG | 2300 KG | 15.1 KG | | 2 M | 2.00 | 3.25 | 3000 KG | 2200 KG | 16.8 KG | | 3 M | 2.00 | 3.75 | 2900 KG | 2000 KG | 19.1 KG | | 4 M | 3.00 | 4.65 | 2300 KG | 1150 KG | 22.5 KG |
Minimum Characteristic strength
|
| | |
|
|
